SQR Series Multi-purpose Rotary Drill Rig

Multi-purpose rotary drilling rig is one kind of intelligence, highly effective pile foundation hole-forming equipment.

SQR15-25 Series Rotary Drill rig

Chassis & Engine

Adopt rotary drilling rig hydraulic telescopic crawler dedicated chassis, ensure the whole machine stability, good mobility, and strong adaptability during operation. 

Adopt the most advanced imported engine as power source, turbo supercharging upgrades the engine performance and power, direct fuel injection type electronics controller provides timely and accurate fuel charge, sufficient burning, to achieve strong power output with low fuel consumption, low emissions and low noise.

Control System

Electrical control system is the headquarter of the rotary drilling rig, using CAN-BUS technology, achieve the intelligent controls of engine monitoring, drill movements control, virtual instrument, fault detection and diagnosis, alarm and information display, etc.

Hydraulic System

Adopt the double motors and double reducers with world famous Italian Brevini system, the rotary table can automatically adjust the drilling speed with the stepless speed regulation to meet high torque output and the demands for the hard ground layer at geological condition. Multi-point lubrication, three levels sealing of gearbox ensures construction requirements in severe environment. Heavy duty shock absorber reduces the impact of rotary table effectively.

The hydraulic system has the contemporary international advanced level negative flow control and the regeneration function, to meet the specific request and the energy saving purpose. The constant power and the electrical power override control, to bring engine into maximum function. The operation adopts the LS forerunner controlling for accuracy, sensitivity and safety.

Working Device

The lift system of main winch with the system optimization design increases the durable and safety coefficient, doubles the service life of steel wire, and reduces the equipment's running cost in large scale.

The parallelogram system adopts the popular parallelogram structure, all pin rolls connection is with double support structure, each hinge point by optimal design could move swiftly, good stability and high efficiency operation.

Cabin

The cabin with air condition and dust prevention may be used for windy and dusty with automatic defrosting, shockproof and sound-proof, tridimensional blowing-in, wide open, safety and comfortable, also available at construction the alpine and low voltage area.

Drill Pipe & Drill Tool

Friction-type drill pipe or lock-type drill pipe may be selected according to different geological conditions. The drill pipe is made of high strength alloy seamless tube with six-key structure, and has such features as uniform force, good rigidity and long service life, etc.

Different forms of drills are selected under different geological conditions, drill tool could be short twist drills, universal drilling bucket, sand bucket, used for the clay bed, gravel bed, pebble bed and rock formation with a certain weathering degree, to ensure the smooth and efficient construction of equipment.

Model				SQR15	SQR20	SQR22	SQR25
Max. drilling diameter		With casing	mm	1200	1300	1800	1800
		Without casing	mm	1500	1800	2200	2500
Max. drilling depth			m	60	60	68	72
Min. working radius			mm	3100	3600	3830	4105
Total weight			T	48	58	70	75
Engine and undercarriage	Engine model			Optional	6CTA8.3-C260	TAD942VE	TAD942VE
	Undercarriage model			Optional	ZJ16B-6	SQR22.0	SQR25.0
	Rated power		kW/rpm	125 / 2100	194 / 2000	250 / 2100	250 / 2100
Hydraulic system	Max. working pressure (main pump)		Mpa	34	34	35	35
	Max. flow rate (main pump)		L/min	2×205	2×250	2×260	2×260
Rotary table	Max. torque		kN.m	150	200	220	250
	Rotating speed		rpm	6~20	6~25	7~26	6~24
Crowd cylinder	Max. pushing force		kN	150	150	180	180
	Max. pulling force		kN	160	200	240	240
	Max. stroke		mm	4250	4300	5300	5300
Main winch	Max. pulling force		kN	160	200	210	245
	Max. pulling speed		m/min	70	79	70	62
	Wire rope diameter		mm	28	28	32	32
Auxiliary winch	Max. pulling force		kN	60	76	110	110
	Max. pulling speed		m/min	60	79	70	70
	Wire rope diameter		mm	14	20	20	20
Mast tilt	Sidewards		°	±3	±3	±6	±6
	Forwards		°	5	5	5	5
	Backwards		°	15	15	15	15
Swing platform	Swing angle		°	360	360	360	360
	Swing speed		r/min	2.5	3	2.8	2.61
Undercarriage	Max. driving speed		km/h	1.8	3.5	1.73	1.61
	Max. gradeability		°	15	15	15	15
	Min. ground clearance		mm	320	385	443	443
	Track shoes width		mm	700	700	800	800
	Telescopic crawler width		mm	3000~4000	3200~4400	3190~4490	3190~4490
	Overall length of crawler		mm	4000	4450	5000	5000
	Traction		kN	220	360	400	400
Kelly bar	Lock		mm	4×Φ377×13000	4×Φ406×13000	4×Φ440×14500	4×Φ440×15500
	Friction		mm	5×Φ377×13000	5×Φ406×13000	5×Φ440×14500	5×Φ440×15500
Dimention	Transportation length                       TL		m	13.3	14.3	15.1	15.8
	Transportation height                       TH		m	3.23	3.45	3.4	3.4
	Operation height                               OH		m	19.32	19.9	21	22
	Transportation width                         TW		m	3	3.2	3.2	3.2
	Operation width                               OW		m	4	4.4	4.4	4.4

SQR Series Multi-purpose Rotary Drill Rig